how to adjust cam chain tensioner on motorcycle
The correct adjustment of the motorcycle cam chain tensioner is essential for the performance and life of the engine. The function of the tensioner is to maintain the proper tension of the cam chain and avoid engine failure caused by loose or over-tightened chain. This article will introduce in detail how to adjust the motorcycle cam chain tensioner, and combine the high-quality tensioner products provided by Hightac Motorcycle Accessories Company to help motorcycle owners and maintenance personnel master this key skill.
1. The role and importance of the cam chain tensioner
The cam chain tensioner is an important part of the motorcycle engine. Its main function is to automatically adjust the tension of the cam chain through the internal spring or hydraulic device. If the chain tension is improper, it may cause abnormal engine noise, chain skipping and even engine damage. Therefore, regular inspection and adjustment of the cam chain tensioner is an indispensable part of motorcycle maintenance.
2. Steps to adjust the cam chain tensioner
(I) Preparation
Tool preparation: Prepare appropriate tools such as wrenches, screwdrivers, torque wrenches, etc.
Environmental preparation: Make sure the motorcycle is parked on a stable ground, turn off the engine and cool for a period of time to avoid burns.
Reference manual: Prepare the maintenance manual of the motorcycle so that you can check the specific location and adjustment requirements of the relevant parts.
(ii) Check the chain tension
Use the main stand to support the motorcycle and step on the gearshift pedal to shift into the neutral position.
Swing the chain up and down to check that its swing should be within 10 to 20 mm. If the chain swing is not within this range, it needs to be adjusted.
(iii) Adjust the tensioner
Loosen the tensioner nut: Use an appropriate tool, such as a wrench or screwdriver, to turn the bolt or screw on the tensioner counterclockwise to gradually tighten the chain.
Adjust the chain adjuster: Loosen the chain adjuster locking nut, turn the adjustment bolt clockwise to reduce the chain swing; turn the adjustment bolt counterclockwise to increase the chain swing. Adjust the chain swing to within 10 to 20 mm.
Start the engine test: Loosen the rear axle locking nut and the rear brake adjustment nut, start the engine and run it for a while, then turn it off. Check whether the chain tension is appropriate and make fine adjustments as needed.
(IV) Precautions
Avoid over-tightening: During installation and adjustment, avoid over-tightening the bolts to avoid damaging the components.
Check the tensioner status: During removal and installation, check the appearance of the tensioner for damage, such as cracks or deformation. At the same time, check whether the internal spring is working properly.
Ensure the chain tension: After adjustment, ensure that the chain tension on both sides is consistent to avoid abnormal engine noise due to one side being too tight or too loose.
III. Hightac Motorcycle Accessories Company: Selection of high-quality cam chain tensioners
Hightac Motorcycle Accessories Company focuses on the production of high-quality motorcycle accessories, and its cam chain tensioners are known in the market for their reliability and durability. Hightac's tensioner products use advanced manufacturing processes and high-quality materials, and can perfectly adapt to a variety of motorcycle models.
Features of Hightac Cam Chain Tensioners
High adaptability: Hightac's tensioners are manufactured strictly in accordance with the design standards of motorcycle manufacturers and can perfectly adapt to motorcycles of brands such as Yamaha, Honda, and Suzuki.
Reliable quality: Hightac uses high-quality materials and strict quality inspection processes to ensure the durability and stability of each tensioner.
Diverse choices: Hightac offers a variety of cam chain tensioner models to meet the needs of different motorcycles.
IV. Common problems and solutions
(I) Chain noise
If the chain makes an abnormal noise, it may be that the chain is too loose or the tensioner is faulty. The problem can be solved by adjusting the tensioner or replacing the chain.
(II) Tensioner failure
If the tensioner does not work properly, it may need to be replaced with a new tensioner. It is recommended to choose products from well-known brands such as Hightac to ensure quality and performance.
V. Summary
Adjusting the motorcycle cam chain tensioner is an important part of motorcycle maintenance. Through correct adjustment, the normal operation of the engine can be ensured and the service life of the chain and engine can be extended. The high-quality tensioner products provided by Hightac Motorcycle Accessories are a reliable choice for car owners and maintenance personnel.
If you encounter any problems during the adjustment process, it is recommended to refer to the motorcycle maintenance manual or consult a professional motorcycle maintenance technician. I hope the introduction in this article can help you better master the adjustment method of the cam chain tensioner to ensure the safety and performance of your motorcycle.